Control Surfaces Supported by Logic Express

Following is an alphabetical listing of control surfaces directly supported by Logic Express. The list contains cross-references to the relevant device-specific chapters.

Note: It is possible that your device may be directly supported in Logic Express via one or more downloadable support files. This is often a driver or plug-in supplied by the manufacturer. (See About Control Surface Plug-ins.) Check the documentation and discs that came with the device, and the manufacturer’s website. Follow any written instructions supplied with the files, if available.

Supported devices
Manufacturer
Notes
01V96
Yamaha
The Yamaha 01V96 emulates two HUI units, using two virtual MIDI In and Out connections over its USB cable. See Yamaha 01V96.
01X
Yamaha
The Yamaha 01X emulates a Mackie Control. It does not feature all controls available to the Mackie units, however. Refer to the 01X documentation for details. Logic Express recognizes the 01X as an 01X, and displays a custom icon, but communication is as with a Mackie Control unit. See Mackie Control.
02R96
Yamaha
The Yamaha 02R96 emulates three HUI units, using three virtual MIDI In and Out connections over its USB cable. See Yamaha 02R96.
Baby HUI
Mackie
The Baby HUI is a stripped-down version of the HUI. See Mackie Baby HUI.
C4
Mackie
The Mackie C4 is directly supported. See Mackie C4.
CM408T (System 5-MC)
Euphonix
CS-32 MiniDesk
JLCooper
DM1000
Yamaha
The Yamaha DM1000 emulates two HUI units, using two virtual MIDI In and Out connections over its USB cable. See Yamaha DM1000.
DM2000
Yamaha
The Yamaha DM2000 emulates three HUI units, using three virtual MIDI In and Out connections over its USB cable. See Yamaha DM2000.
FaderMaster 4/100
JLCooper
FE-8
Tascam
Extension unit for FW-1884. See Tascam FW-1884.
FW-1082
Tascam
A stripped-down version of the FW-1884. See Tascam FW-1884.
FW-1884
Tascam
HUI
Mackie
iControl
M-Audio
KONTROL49
Korg
A larger version of the microKONTROL. See Korg microKONTROL and KONTROL49.
Logic Control XT
Mackie/Emagic
This is the extension unit for the Logic Control. It only offers the channel strip section, making it less useful without a Logic (or Mackie) Control. See Mackie Control.
Logic/Mackie Control
Mackie/Emagic
See Mackie Control for more details.
Mackie Control
Mackie
The original Mackie Control hardware is similar to the Logic Control. The front panel legend is different, however. You should request a Logic Control Lexan Overlay from Mackie. As Logic Express also recognizes the Mackie Control protocol, you may use any firmware version. If your unit has firmware version 1.02 or later, you can freely use either the Logic Control or Mackie Control mode. See Mackie Control.
Mackie Control Extender
Mackie
Mackie-badged version of the Logic Control XT. As Logic Express also recognizes the Mackie Control protocol, you may use any firmware version. If you have firmware version 1.02 or later, you can freely use either the Logic Control or Mackie Control mode. See Mackie Control.
Mackie Control Universal
Mackie
A Mackie Control with Logic Control silk screening (legend) and firmware version 2.0 or later (including HUI emulation). As Logic Express also recognizes the Mackie Control protocol, you may use any firmware version. If you have firmware version 1.02 or later, you can freely use either the Logic Control or Mackie Control mode. See Mackie Control.
MC
Euphonix
MCS3
JLCooper
microKONTROL
Korg
Motormix
CM Labs
Radikal Technologies
SAC-2.2
The SAC-2.2/2k’s native mode is directly supported, but it can also emulate a Mackie Control. You should use the native mode. See Radikal Technologies SAC-2K.
Radikal Technologies
SAC-2k
SI-24
Roland
TranzPort
Frontier Design Group
US-224
Tascam
A stripped-down version of the US-428. See Tascam US-428 and US-224.
US-2400
Tascam
Logic Express supports the US-2400’s native mode. In contrast to its Mackie Control mode, all controls, including the joystick, are supported. See Tascam US-2400.
US-428
Tascam