Yamaha 02R96: Assignment Overview

The following sections outline the assignment of Yamaha 02R96 interface elements to Logic functions.

Yamaha 02R96: DISPLAY ACCESS Section

The following table outlines the DISPLAY ACCESS control assignment:

Control
Assignment
METER
Clears overload LEDs.

Yamaha 02R96: AUX SELECT Section

The following table outlines the AUX SELECT controls and their assignments:

Control
Assignment
AUX 1
Assigns Send 1 level to encoders, and Send 1 to 4 levels to virtual encoders. While held down, the channel strip display shows the current Send 1 destination assignment.
AUX 2
Assigns Send 2 level to encoders, and Send 1 to 4 levels to virtual encoders. While held down, the channel strip display shows the current Send 2 destination assignment.
AUX 3
Assigns Send 3 level to encoders, and Send 1 to 4 levels to virtual encoders. While held down, the channel strip display shows the current Send 3 destination assignment.
AUX 4
Assigns Send 4 level to encoders, and Send 1 to 4 levels to virtual encoders. While held down, the channel strip display shows the current Send 4 destination assignment.
AUX 5
Assigns Send 5 level to encoders, and Send 5 to 8 levels to virtual encoders. While held down, the channel strip display shows the current Send 5 destination assignment.

Yamaha 02R96: ENCODER MODE Section

The following table outlines the ENCODER MODE controls and their assignments:

Control
Assignment
PAN
Assigns pan to encoders; assigns selected channel strip’s pan parameters to virtual encoders.
AUX
Assigns Send 1 level to encoders, and Send 1 to 4 levels to virtual encoders. While held down, the channel strip display shows the current Send 1 destination assignment.

Yamaha 02R96: FADER MODE Section

The following table outlines the FADER MODE controls and their assignments:

Control
Assignment
FADER
Enables/disables Flip mode.
AUX/MTRX
Enables/disables Flip mode.

Yamaha 02R96: EFFECT/PLUG-IN Section

The following table outlines the EFFECT/PLUG-IN controls and their assignments:

Control
Assignment
Display
Opens or closes the Sample Editor.
PLUG-INS
Switches SEL buttons and encoder buttons between normal behavior and setting a parameter’s default value.
CHANNEL INSERTS
Determines mode of channel strip SEL buttons:
  • Indicator off: SEL button used for channel strip selection

  • Indicator on: SEL button used for Insert selection

2
Switches the display between “track name/parameter name” and “parameter name/parameter value” modes.
3
Switches the bypass state of plug-in currently being edited.
4
Switches between Plug-in Assign and Plug-in Edit modes.
Parameter Up & Parameter Down
Plug-in Edit mode: shifts the parameter display to show the next/previous page of parameter controls (usually four) for the selected plug-in.
Selecting virtual encoders 1 to 4 (Use cursor keys, and then press ENTER button.)
Pan Assignment mode:
  • Parameter control 1 button centers pan angle.

Send Assignment mode:
  • Enables/disables Sends 1 to 4 or 5 to 8.

Plug-in Assignment mode:
  • Confirms the plug-in selection for Insert slots 1 to 4 or 5 to 8, and enters Plug-in Edit mode for the selected Insert slot.

Plug-in Edit mode:
  • Sets value to default, or switches buttons with two states.

Moving virtual encoders 1 to 4 (Use cursor keys, and then rotate parameter wheel.)
Pan Assignment mode:
  • Parameter control 1 edits pan angle.

Send Assignment mode:
  • Controls the Send level of Sends 1 to 4 or 5 to 8.

Plug-in Assignment mode:
  • Chooses Insert slot 1 to 4 or 5 to 8.

Plug-in Edit mode:
  • Sets value.

Yamaha 02R96: LCD

The LCD displays different data, depending on the page selected with the F2, F3, and F4 buttons:

  • INSERT ASSIGN/EDIT Display mode: Parameter details, plug-in selection, or plug-in parameters. Press F2 to select this mode.

  • Channel view mode: Encoder values and channel strip display. Press F3 to select this mode.

  • Level meters view mode: Press F4 to select this mode.

The following assignments are available in all three modes:

Display
Assignment
TIME CODE
Active if counter is displaying SMPTE time code.
BEATS
Active if counter is displaying bars/beats/divisions/ticks.
Counter
Displays SMPTE time code or bars/beats/divisions/ticks.
SELECT ASSIGN
Displays the Encoder assignment as follows: Pan, Snd1 to Snd8, S1As to S8As, In, Out.

Yamaha 02R96: USER-DEFINED KEYS Section

The following table outlines the USER-DEFINED KEY controls and their assignments:

Control
Assignment
Display
While held down, the display shows the automation mode of the channel strips in the current bank selection.
1
Switches between the Arrange window and the Mixer.
2
Enables/disables the Group Clutch.
3
Sets selected channel strip, or channel strip group, to Write automation mode.
4
Sets selected channel strip, or channel strip group, to Touch automation mode.
5
Sets selected channel strip, or channel strip group, to Latch automation mode.
6
Sets selected channel strip, or channel strip group, to Read automation mode.
8
Sets selected channel strip, or channel strip group, to Off automation mode.
9
Shifts channel strips by one bank to the left.
10
Shifts channel strips by one bank to the right.
11
Enables/disables volume automation playback and recording.
12
Enables/disables mute automation playback and recording.
13
Enables/disables pan automation playback and recording.
14
Enables/disables send level automation playback and recording.
16
Enables/disables plug-in parameter automation playback and recording.

Yamaha 02R96: Channel Strips

The following table outlines the channel strip controls and their assignments:

Control
Assignment
Encoder
Adjusts parameter selected in the AUX SELECT section.
Encoder Select button
Pan selected: sets pan to center position.
If EFFECTS/PLUG-INS [PLUG-INS] on Sends 1 to 8 is selected: edits Send Pre/Post, switches Send Mute status, or sets Send Level to default value.
Send Assign, Input, or Output: confirms selection.
AUTO
Cycles through automation modes. When an automation mode button is held down, sets this automation mode.
SEL
If EFFECTS/PLUG-INS [CHANNEL INSERTS] off: selects channel.
If EFFECTS/PLUG-INS [CHANNEL INSERTS] on: chooses channel for plug-in selection/insertion.
SOLO
Enables/disables Solo button.
ON
Enables/disables Mute button.
Fader
Adjusts volume, or duplicates Encoder in Flip mode.

Yamaha 02R96: MACHINE CONTROL Section

The following table outlines the controls in the MACHINE CONTROL section and their assignments:

Control
Assignment
display
Opens or closes the Marker tab in the Lists area.
1 to 8
Recalls markers 1 to 8.
REW
Shuttles backward.
FF
Shuttles forward.
STOP
Stop
PLAY
Play
REC
Record

Yamaha 02R96: Data Entry Section

The following table outlines the data entry controls and their assignments:

Control
Assignment
SCRUB
Enables/disables Scrub mode.
SHUTTLE
Enables/disables Shuttle mode.
Parameter Wheel
Default: adjusts the value of the currently selected parameter. Scrub: Scrub mode. Shuttle: Shuttle mode.
ENTER
Enters selected folder.
DEC
Exits folder.
INC
Switches between Cursor and Zoom modes.
Cursor Up
Cursor mode: equivalent to computer keyboard Up Arrow key.
Zoom mode: zooms out vertically.
Cursor Down
Cursor mode: equivalent to computer keyboard Down Arrow key.
Zoom mode: zooms out vertically.
Cursor Left
Cursor mode: equivalent to computer keyboard Left Arrow key.
Zoom mode: zooms out horizontally.
Cursor Right
Cursor mode: equivalent to computer keyboard Right Arrow key.
Zoom mode: zooms in horizontally.